某型无人直升机飞行传感器故障模拟与容错技术研究*

作者：邱宏峰1，谢 勇2，陈照海2，刘小芳1 日期：2010-09-08/span> 浏览：3591 查看PDF文档

某型无人直升机飞行传感器故障模拟与容错技术研究*

邱宏峰1，谢 勇2，陈照海2，刘小芳1

（1.浙江工业大学 机电工程学院，浙江 杭州 310014； 2.南京航空航天大学 自动化学院，江苏 南京 210016）

摘要：针对某型无人直升机半实物仿真系统中传感器故障模拟与容错技术问题，设计了无人直升机飞行传感器模拟系统来模拟大气数据计算机、无线电高度表、GPS机载传感器等信号，对无人直升机的高度、升降速率和速度进行了故障仿真、替代容错处理及模态容错处理，提出了软件故障注入方法并实现了传感器模拟信号的注入，采用VC6.0设计了以上3种传感器的故障注入程序，实现了对无人直升机传感器故障容错设计的验证。研究结果表明，采用该设计验证方式能准确验证无人直升机传感器故障容错的有效性。
关键词：无人直升机；故障模拟和容错；软件故障注入；替代容错；模态容错
中图分类号：TH76；V328.5
文献标识码：A文章编号：1001-4551(2010)08-0064-06

Study of unmanned helicopter flight sensor fault simulation and tolerant technology
QIU Hongfeng1, XIE Yong2, CHEN Zhaohai2, LIU Xiaofang1
（1. School of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China;
2. Department of Automation, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China）

Abstract: Aiming at the issues of a sensor fault simulation and tolerance technology researched in the hardware in the loop simulation system of unmanned helicopter, a unmanned helicopter flight sensor simulation computer was designed to simulate the signal of air data computer, radio altimeter and GPS. A software fault inject method was introduced and the sensor signals injection was realized. The three sensors fault tolerance programs were designed with VC6.0 and the sensors fault tolerance design of unmanned helicopter was verified. The result shows the availability of unmanned helicopter sensors fault tolerance.
Key words: unmanned helicopter; fault simulation and tolerance; software fault inject; replace tolerance; model tolerance