《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

塑料薄膜与流延辊换热过程的模拟分析

作者:李福森,王栓虎*,李欣兴,杨晓青 日期:2010-09-08/span> 浏览:2941 查看PDF文档

塑料薄膜与流延辊换热过程的模拟分析

李福森,王栓虎*,李欣兴,杨晓青

(南京理工大学 机械工程学院,江苏 南京 210094)

摘要:为实现流延辊辊面温度场的均匀性和稳定性,保证塑料薄膜的高质生产,应用Fluent软件对双向回流式螺旋流道的流延辊的换热过程进行了数值模拟;分析了流延膜在流延辊上冷却时的导热、对流、辐射综合的非稳态传热过程,了解了流延膜冷却过程中的传热机理,得出了流延辊内部流道结构、冷却水的流量对流延辊换热强度的影响趋势。研究结果表明,该研究可以为流延辊结构的合理设计、流道参数的优化提供指导。
关键词:流延辊;塑料薄膜;传热;数值模拟;冷却机理
中图分类号:TH122;TH123;TQ337.1
文献标识码:A文章编号:1001-4551(2010)08-0056-04

Simulation and analysis of heat transfer process of casting film and chill roll
LI Fu-sen, WANG Shuan-hu, LI Xin-xing, YANG Xiao-qing
(School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China)

Abstract: Aiming at realizing the uniformity and stability of the surface temperature field of the casting roller, ensuring the high quality production of plastic film, the casting roller which included double inlet and outlet spiral path was given a numerical simulation of heat transfer process by Fluent software. The comprehensive non-steady state heat transfer process which including heat conduction, convection and radiation was analyzed. The process of the film cooling was researched for heat transfer mechanism. The heat transfer intensity of the casting roller which was affected by the internal flow channel structure of the casting roller and the flow of the cooling water was analyzed and researched for the influence trends. The results indicate that the analysis can provide guidance for designing casting roller reasonably and optimizing the channel parameter.
Key words: casting roller; plastic film; heat transfer; numerical simulation; cooling mechanism



友情链接

浙江机械信息网