基于变参数减振原理的铣切锯控制系统

作者：易朝亮，项占琴，吕福在 日期：2008-04-23/span> 浏览：3959 查看PDF文档

基于变参数减振原理的铣切锯控制系统
易朝亮，项占琴，吕福在
（浙江大学 现代制造工程研究所，浙江 杭州 310027）

摘 要：仿形铣切锯作为新型数控锯机，在大口径钢管加工线上具有广阔的应用前景。通过引入变参数铣削减振原理，对仿形铣切锯控制系统进行了优化设计，并在铣切过程中实时改变锯机的进给量和主轴转速等加工参数。结果显示，该控制系统可以有效地抑制加工过程中产生的强迫振动和颤振，提高产品加工质量和加工效率。
关键词：铣切锯;颤振;强迫振动；伺服

Milling flying saw control system based on the principle of suppressing vibration by milling with varying milling parameters
YI Chaoliang, XIANG Zhanqing, LV Fuzai
（Institute of Advance Manufacturing Engineering, Zhejiang University, Hangzhou 310027, China）

Abstract: As a new kind of NC saw machine, milling flying saw has a great market prospect in pipe processing lines. The principle of suppressing vibration by milling with varying milling parameters was introduced to guide a better design of the control system of the milling flying saw. By applying different processing parameters, such as feed rate and spindle speed, the forced vibration and chatter were suppressed effectively during the processing. The processing quality and efficiency were also improved.
Key words: milling flying saw; chatter; forced vibration; servo

参考文献(Reference):
［1］郭继富，郑红艳，周玉燕，等.ERW钢管的数控仿形锯切技术概述［J］.焊管,2006,29(2):33-35
［2］李沪曾,SPUR G.平面端铣切削振动试验［J］.振动、测试与诊断,1999,19(3):178-182.
［3］于骏一,杨辅伦,吴博达.变速切削方法的减振原理［J］.机械工程学报,1995,31(6):11-16.
［4］师汉民.金属切削理论及其应用新探［M］.武汉:华中科技大学出版社,2003.
［5］INAMURA T, SATA T. Stability analysis of cutting under varying spindle speed［J］. Annals of the CIRP〖WTBZ〗,1974,23(1):119-120.
［6］SEXTON J S, STONE B J. The stability of machining with continuously varying spindle speed［J］. Annals of the CIRP,1978,27(1):321-326.