《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于相对密度机床立柱结构的动力学拓扑优化*

作者:汪列隆1,2,朱壮瑞1 日期:2008-04-23/span> 浏览:3284 查看PDF文档

基于相对密度机床立柱结构的动力学拓扑优化*
汪列隆1,2,朱壮瑞1
(1.东南大学 机械工程学院,江苏 南京 210096; 2.池州学院 机电工程系,安徽 池州 247000)

摘 要:构造了基于相对密度法的连续体结构动力学拓扑优化设计数学模型,以结构的相对密度为设计变量,结构基频最大化为目标函数,满足结构工况和相对体积比为约束条件,采用启发式优化准则法进行迭代求解;基于该方法和等效质量块对机床立柱结构进行了动力学拓扑优化设计,再对优化后整机进行了动力学仿真。仿真结果表明,该优化设计模型可大大提高机床整机的动、静态特性,同时也验证了所提出的设计模型及优化准则的合理性和有效性。
关键词:相对密度;机床立柱;结构动力学特性;拓扑优化设计

Optimal dynamic topology design of mechanical tool column with relative density
WANG Lielong1,2, ZHU Zhuangrui1
(1.College of Mechanical Engineering, Southeast University, Nanjing 210096, China;
2.Department of Mechanical and Electrical Engineering, Chizhou Institute, Chizhou 247000, China)

Abstract: Considering the relative density, the mathematical models of structural dynamic characteristic topology optimal design on continuum structures were established. Where structural relative density was taken as the design variable and maximum of the structure base frequency as the objective function, the structure operating condition and the relative volume rate as the constraints, the iteration was solved by heuristic optimized criterion. The dynamic topology optimization of mechanical tool column was designed by the method and the equivalent mass. After the dynamics simulation of optimized mechanical tool was made, its result greatly enhances new mechanical tool dynamic and static characteristics. Its result is presented to illustrate the correctness and efficiency of the proposed models and criterions.
Key words: relative density; mechanical tool column; structural dynamic characteristic; topology optimal design

参考文献(Reference):
[1]汪树玉,刘国华,包志仁.结构优化设计的现状与进展[J].基建优化,1999,20(4):3-14.
[2]ESCHENAUER O N. Topology optimization of continuum structures[J]. A review. Applied Mechanics Review,2001,5(4):331-390.
[3]陈建军,车建文.结构动力优化设计述评与展望[J].力学进展,2001,31(2):182-192.
[4]BENDSOE M P. Optimization of Structural Topology, Shape and Material[M]. SpringerVerlag,1995.
[5]ZHANG W H, SUN S P. Topology Optimization of Elastic Material Microstructures With Classic Models of Micro Mechanics[C]. Proceedings of WCCM V I in Conjunction with APCOM 04,2004.
[6]LIU Shutian, AN Xiaomin, JIA Haipeng. Topology Optimization of Beam Cross Section Considering Warping Deformation[C]. Proceedings of WCCM V I in Conjunction with APCOM 04,2004.
[7]杨德庆,刘正兴,隋允康.连续体结构拓扑优化设计的ICM方法[J].上海交通大学学报,1999,33(6):734-736.
[8]JOG C S, HABER R B, BENDSOE M P. A new approach to variable topology shape design using a constraint on perimeter[J]. Structural Optimization,1996,11(1):1-12.
[9]汪列隆.机床导轨滑块结合面参数识别研究[J].机械工程师,2006(9):55-57.



友情链接

浙江机械信息网