《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于DQ变换的三相PWM整流器控制方案

作者:陆熙,石健将,何湘宁 日期:2008-02-25/span> 浏览:3315 查看PDF文档

基于DQ变换的三相PWM整流器控制方案

陆熙,石健将,何湘宁
(浙江大学 电气工程学院,浙江 杭州 310027)

摘要:在传统的电压型整流器三相高频数学模型的基础上,采用DQ坐标变化对其模型进行了改进。根据此模型提出了相应的控制方案,并设计了相应的控制参数。采用SABER仿真工具对选择的控制参数进行了仿真,并给出了仿真结果。最后使用TM320F2812 DSP完成了硬件试验,得到了试验波形。
关键词:DQ变换;控制策略;仿真;数字信号处理;脉宽调制
中图分类号:TM461文献标识码:A文章编号:1001-4551(2008)01-0078-04

Control methods for three phase PWM rectifier based on DQ transform
LU Xi, SHI Jianjiang, HE Xiangning
(College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China)
Abstract: The three phase PWM rectifier model was improved using DQ transform based on the three phase and high frequency model of traditional voltage rectifier. The control methods based on DQ transform were presented, the control parameter were designed. Using simulation tool of SABER, the selected parameters were simulated and the simulation results were given. In the end, using TM320F2812 DSP, the hardware experiment was done and the wave was gotten.
Key words: DQ transform; methods of control; simulation; digital signal processing (DSP); pulse width modulation (PWM)
参考文献(Reference):
[1]方宇,裘逊,邢岩,等.三相高功率因数电压型PWM整流器建模与仿真[J].电工技术学报,2006,21(10):44-49.
[2]HABETLER T G. A space vectorbased rectifier regulator for AC/DC/AC converters[J]. IEEE Transactions on Power Electronics,1993,8(1):30-36.
[3]YAMAMOTO K, SHINOHARA K. Comparison between space vector modulation and subharmonic methods for current harmonics of DSPbased permanentmagnet AC serve motor drive system[J]. IEEE Proc. Electr.Power Appl.,1996,143(2):151-156.
[4]徐德鸿.电力电子系统建模及控制[M].北京:机械工业出版社,2006.
[5]朱永亮,马惠,张宗濂.三相高功率因数PWM整流器双闭环控制系统设计[J].电力自动化设备,2006,26(11):87-90.
[6]赵振波,李和明,单位功率因数PWM整流器双闭环PI调节器设计[J].电工技术杂志,2003(5):68-71.



友情链接

浙江机械信息网