《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

刀具位移的在线检测与数控修正技术*

作者:张云电,林金钳,胡皇印 日期:2007-10-24/span> 浏览:3327 查看PDF文档

刀具位移的在线检测与数控修正技术*

张云电,林金钳,胡皇印
(杭州电子科技大学 机械制造及自动化研究所,浙江 杭州 310018)

摘要:针对蜂窝状表面微坑低频振动冲击加工中存在的问题,提出了利用位置敏感器件(PSD)和微处理器为核心构成在线二点法的刀具位移在线检测系统,将检测出来的实际参数传递给上位计算机,计算出刀具的修正位置和修正余量,由伺服电机驱动刀具在缸套内表面低频振动冲击加工,形成分布规律和结构参数可控的微坑,从而有效保证表面微坑深度的一致性及其分布的均匀性。
关键词:低频振动;微坑加工;在线检测;数控修正;位置传感器
中图分类号:TP274;TG506文献标识码:A文章编号:1001-4551(2007)09-0014-03

Online detection and numerical control amend technology of machining tool displacement
ZHANG Yundian, LIN Jinqian, HU Huangyin
(The Institute of Mechanical Manufacture & Automation, Hangzhou Dianzi University, Hangzhou 310018, China)
Abstract: According to the problem that exists in low frequency vibration manufacture for honeycomb micropits of working surface, an online detection and measurement system for machining tool displacement by online twopoints method composed of position sensitive detector (PSD) and micro control unit (MCU) was presented. The measured practical parameters were transmitted to computer for calculating the different values between the practical and theory. The machining tool was actuated by servomotor to machining the micropits of working surface precisely, ensuring the consistency of depth and the uniformity of distribution for micropits.
Key words: low frequency vibration; micropits machining; online detection; numerical control amend; position sensitive detector(PSD)

参考文献(Reference):
[1]张云电.薄壁缸套生产技术[M].北京:国防工业出版社,2000.
[2]张云电.蜂窝状微坑设计和制造技术[M].北京:科学出版社,2004.
[3]金世俊,黄惟一.利用PSD提高激光三角法在线测量的精度[J].自动化仪表,1998(4):14-16.
[4]王卫辉,王云峰,倪志斌.基于PSD技术的位置自动检测系统[J],仪器仪表用户,2005,12(3):76-77.
[5]DAN L, MATHEW J. Tool wear and failure monitoring techniques for turning a review[J].Precision Engineering,1990,10(4):579-598.
[6]HERTZ R B , HUGHES P C. Kinematic analysis of a general doubletripod parallel manipulator[J]. Mechanism & Machine Theory, 1998,33(6):683-696.
[7]刘惠萍.刀杆在线检测技术的研究[J].自动化技术与应用,2003,22(2):62-64.
[8]张云电,喻家英.蜂窝状点坑数控恒力进给成型机:中国,00267402.5[P].2002-01-30.



友情链接

浙江机械信息网