《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

逆向工程技术及其应用研究

作者:邵柳东,赵文礼,田 帆 日期:2007-07-06/span> 浏览:3603 查看PDF文档

                               逆向工程技术及其应用研究
                                  邵柳东,赵文礼,田 帆
              (杭州电子科技大学 机电工程学院,浙江 杭州 310018)

摘 要:首先介绍了逆向工程的含义及其工作流程,阐述了三维点数据采集的过程及原理,讨论了利用逆向工程软件Geomagic对排气歧管点云数据进行处理,介绍了曲面的创建及造型过程。最后根据用户要求,利用逆向工程技术,实现了对排气歧管复杂曲面的逆向设计与曲面重构。实践表明,利用逆向工程技术可以显著提高产品的设计效率。
关键词:逆向工程;噪声分析;排气歧管

                        Study of reverse engineering and its application
                               SHAO Liudong, ZHAO Wenli, TIAN Fan
(College of Mechanical & Electrical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China)

Abstract: The meanings and basic working flow of reverse engineering were introduced, and the process and principle of acquisition of the 3D point data were expounded. The treatment of the exhaust manifold point cloud data with the reverse engineering software Geomagic was discussed, and the process of surface foundation was also stated Finally, reverse design and surface reconstruction of exhaust pipe were realized, according to user require. Practice shows that, making use of the reverse engineering technique, the design efficiency of the product can be greatly improved.
Key words: reverse engineering; noise analysis; exhaust manifold

参考文献(Reference):
[1]刘之生,黄纯颖.反求工程技术[M].北京:机械工业出版社,1992.
[2]孙玉文.面向快速原型制造的反求工程关键技术研究[D].大连:大连理工大学,2000.
[3]李 强,王红梅.实物反求工程中的模型重建技术[J].机械制造与自动化,2003,30(2):17-20.
LI Qiang, WANG Hongmei. Modets constructing technique in reverse engineering[J]. Machine Buliding & Automation,2003,30(2):17-20.
[4]阮景奎,周学良,代治举.Surface在车身覆盖件逆向工程中的应用[J].模具工业,2004,25(3):11-14.
RUAN Jingkui, ZHOU Xueliang, DAI Zhiju. The application of Surfacer in reverse engineering of auto body metal sheet parts[J]. Die & Mould industry,2004,25(3):11-14.
[5]周 济,周艳红.数控加工技术[M].北京:国防工业出版社,2002.
[6]吴华杰.实物反求设计中尺寸精度的控制[J].机械设计,2001,18(2):15-18.
WU Huajie. Control of dimension accuracy in autiprocessing design of objects[J]. Machine Design,2001,18(2):15-18.
[7]WOO T C, LIANG R. Dimensional measurement of surfaces and their sampling[J]. ComputerAided Design,1993,25(34):233-239.
[8]朱心雄.自由曲线曲面造型技术[M].北京:科学出版社,2000.
[9]施法中.计算机辅助几何设计与非均匀有理B样条(CAD&NURBS)[M].北京:北京航空航天大学出版社,1994.



友情链接

浙江机械信息网