基于TK40A数控车床的切削自激振动控制研究

作者：何庆稀1,2 日期：2007-04-10/span> 浏览：3710 查看PDF文档

                                     基于TK40A数控车床的切削自激振动控制研究
                                                            何庆稀1,2
（1.浙江大学 先进制造工程研究所，浙江 杭州 310027；2.温州职业技术学院 机械工程系，浙江 温州 325035）

摘 要：在现代先进制造加工中，影响数控机床加工效率的因素很多，机床工艺系统的自激振动是其中一个关键因素。针对具体机床，论述了运用预测控制方法进行自激振动控制的原理及具体实现方法。
关键词：TK40A数控车床；加工效率；自激振动；预测控制

                            Controlling vibration stimulated by itself in cutting based on TK40A NC lathe
                                                                      HE Qing-xi
(1.Institute of Modern Manufacture Engineering, Zhejiang University,  Hangzhou  310027, China;2.Department of Mechanical Engineering, Wenzhou Vocational and Technical College, Wenzhou 325035, China)

Abstract: NC machine tools working efficiency affected by sorts of factors in modern manufacturing engineering, the Vibration Stimulated by itself is a key element. The control principle and particular method of vibration stimulated by itself were researched according to the  forecasting based on specific machine tool.
Key words:TK40A NC lathe; working efficiency; vibration stimulated by itself; forecast and control

参考文献：
［1］于骏一，吴博达.机械加工振动的诊断识别与控制［M］.北京：清华大学出版社，1994.
［2］孙月明，唐任仲.机械振动学［M］.杭州：浙江大学出版社，1991.
［3］徐 伟，雷盛开.机械加工自激振动的研究［J］.机械研究与应用，2004，17（3）：23-24.
［4］卢新文.自激振动的计算机模拟［J］.甘肃联合大学学报:自然科学版,2004,18(4):31-33.
［5］MANN B P, INSPERGER T, BAYLY P V, et al. stability of upmilling and downmilling, part2: experimental verification［J］. International Journal of Machine Tools and Manufacture,2003,43(1):25-34.