基于超声波的工件内层表面加工质量的检测

作者：张旭峰,高永全 日期：2007-04-10/span> 浏览：4241 查看PDF文档

                                                      基于超声波的工件内层表面加工质量的检测
                                                              张旭峰,高永全
                                                       （中北大学 理学院,山西 太原 030051）

摘 要：超声波在传播过程中，反射波的时间差与被测量物体的厚度成正比。采用超声波反射波脉冲信号的时间差，来检测工件涂层后内层表面的加工质量，并根据扫描工件表面的测量数据，在计算机上进行三维成像。因此，采用超声波反射波脉冲信号可以完成工件内层表面加工的测量与监测。〖JP〗
关键词：超声波；反射脉冲；压电元件；数据采集；自动成像

                                   Measurement about quantity of product surface under coat based on ultrasonic
                                             ZHANG Xufeng, GAO Yongquan
                           (College of Physics, North University of China, Taiyuan 030051, China)

Abstract: In the dissemination process of ultrasonic, the difference of time between two signals of echoes would be direct proportion to the thickness of product. The quantity of product coat was measured by time diflevence of reflection pulse in the measurement device.  And the imaging in threedimensional was done on a computer, according to the measurement data by scanning the surface of product. Thus it was completed the measurement and monitor.
Key words: ultrasonic; reflection pulse; piezoelectricity component; data aequisition; automation imaging

参考文献：
［1］张如一.应变电测与传感器［M］.北京：清华大学出版社,1999.
［2］张建民.机电一体化原理与应用［M］.北京：国防工业出版社出版,1992.
［3］黄长艺.机械工程测试技术基础［M］.北京：机械工业出版社出版,1998.
［4］刘迎春.传感器原理设计与应用［M］.长沙：国防科技大学出版社,1989.
［5］廖念钊.互换性与技术测量［M］.北京：中国计量出版社,1983.