基于PLC的滑动轴承对接平面拉床控制系统

作者：陈其祥1,耿 璐2,周海海3,陈 黎3 日期：2007-04-10/span> 浏览：4396 查看PDF文档

                                          基于PLC的滑动轴承对接平面拉床控制系统
                                              陈其祥1,耿 璐2,周海海3,陈 黎3
(1.淮南联合大学 机电工程系，安徽 淮南 232001；2.中国矿业大学 机电与信息工程学院，北京 100083；3.南京航空航天大学 机电学院，江苏 南京210016)

摘 要：对开滑动轴承的对接平面精加工是该类产品工艺流程的关键工序。在分析该工序加工工艺过程的基础上，阐述了采用PLC进行全自动液压对接平面拉床控制系统技术改造的设计过程，并说明了其中的相关技术问题。实验证明，该系统运行稳定。
关键词：可编程控制器；液压系统；机床改造；拉床；滑动轴承

                            Control system of broaching machine for bisect plane machining of sliding bearing based on PLC
                             CHEN Qixiang1, GENG Lu2, ZHOU Haihai3, CHEN Li4
(1.Department of Mechanical and Electrical Engineering, Huainan United University, Huainan 232001, China;2.College of Information and Mechanical Engineering, China University of Mining & Technology, Beijing 100083, China;3.College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China)
Abstract: The finish machining of the bisect plane of bisect sliding bearing is the key working procedure of the machining process of such products. The design process of the reform of the machine tool control system of automatic hydraulic broaching machine for bisect plane machining by applying PLC on the basic of analyzing the machining process of this working procedure was discussed, and the relative technical problems were explained. Experiment result shows that the system run realibility.
Key words:programmable logic control(PLC); hydraulic system; reconstruction of machine tool; broaching machine; sliding bearing

参考文献：
［1］邓志良，刘维亭.电器控制技术与PLC［M］.南京：东南大学出版社，2002.
［2］余雷声.电气控制与PLC应用［M］.北京：机械工业出版社，1998.
［3］王兆义.可编程控制器实用技术［M］.北京：机械工业出版社，1997.
［4］周慧玲.机床控制系统数控化改造的研究与应用［J］，机电工程，2005，22（9）：14-17.
［5］周 军.电气控制及PLC［M］.北京：机械工业出版社，2003.