《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

一种用于微谐振器频率调节的静电梳齿结构设计*

作者:许 立,董林玺,王 威 日期:2010-09-08/span> 浏览:2969 查看PDF文档

一种用于微谐振器频率调节的静电梳齿结构设计*

许 立,董林玺,王 威

(杭州电子科技大学 微电子CAD研究所,浙江 杭州 310018)

摘要:针对微梳齿谐振器频率偏移的问题,提出了一种用于微谐振器频率调节的曲线形状静电梳齿结构。通过对梳齿简单模型的静电力分析,得出其静电力位移特性,其斜率就是静电弹性系数;然后从谐振频率出发,分析了影响谐振频率的因素。研究结果表明,对于梳齿式微谐振器,当调谐电压从0 V变化到80 V左右时,器件的有效弹性系数从2.64 N/m减小到1.23 N/m左右,且谐振频率从自然谐振频率18.9 kHz减小到13 kHz,降幅分别为53%和31%。实验结果表明,这种曲线梳齿“软化”了静电微谐振器或者微驱动器的系统弹性,能够有效地调节谐振频率。
关键词:梳齿;频率调节;微谐振器;有效弹性系数
中图分类号:TH703
文献标识码:A文章编号:1001-4551(2010)07-0100-04

Design of electrostatic comb actuator for frequency tuning of micro resonator
XV Li, DONG Linxi, WANG Wei
(Microelectronic CAD Center, Hangzhou Dianzi University, Hangzhou 310018, China)

Abstract: Aiming at the frequency offset of comb micro resonator, a curvedshaped electrostatic comb structure was posed for frequency tuning of micro resonator. Electrostatic forceengagement response was derived from a simple comb finger model and the slope of the response was electrostatic stiffness. The inftuences on tuning resonant frequency was analyzed. The results indicate that, for comb micro resonators, when tuning voltage is changed from 0 V to 80 V, effective stiffness of the device is decreased from 2.64 N/m to 1.23 N/m and the resonant frequency is decreased from natural frequency(18.9 kHz) to 13 kHz, dropping 53% and 31% respectively. The results indicate that the presented curve comb can soften the stiffness of electrostatic resonator or micro actuator so as to tune resonant frequency effectively.
Key words: comb finger; frequency tuning; micro resonator; effective stiffness



友情链接

浙江机械信息网