《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于PLC的高精度飞剪控制系统*

作者:李天真,蒉秀惠 日期:2010-03-26/span> 浏览:3800 查看PDF文档

基于PLC的高精度飞剪控制系统*

李天真,蒉秀惠
(湖州职业技术学院 机电工程分院,浙江 湖州 313000)

摘要:针对国产高线飞剪系统剪切定位不精确、运行不稳定以及剪切速度不高等缺陷,设计了基于GE 90-30可编程逻辑控制器(PLC)的高线高精度飞剪控制系统,实现了轧线信号及处理、夹送辊操作、飞剪驱动模块、头部剪切操作、尾部剪切操作、单剪切、报警等功能。结果表明:剪切速度最大可达22 m/s,剪切精度达到误差小于10 mm,具有良好的剪切精确度和响应速度。
关键词:高速线材;飞剪;可编程逻辑控制器;控制系统
中图分类号:TP273文献标识码:B文章编号:1001-4551(2010)01-0100-03

Highprecision flying shear control system based on PLC
LI Tianzhen, KUI Xiuhui
(School of Mechanical & Eleetrical Engineering, Huzhou Vocational Technology College, Huzhou 313000, China)
Abstract: Aiming at the flaws in disprecision of cutting position, instability of operation and deficiency of cutting speed, a highprecision flying shear control system based on GE 90-30 programmable logic controller (PLC) was designed. The many functions were realized, such as catching and processing signal in the highline rolling production line, pinch roll operation, flying shear driving module, forehead cutting operation, rear part cutting operation, single cutting, alarm, and so on. The practice indicates that the cutting speed can achieve 22 m/s and the error of cutting precision is smaller than 10 mm, which means this system has excellent cutting precision and outstanding speed of response.
Key words: highspeed wire rod; flying shear; programmable logic controller (PLC); control system
参考文献(References):
[1]阎占文.PLC在飞剪控制中的应用[J].天津冶金,2003(2):82-85.
[2]冯汉彪.PLC在高速线材生产线飞剪控制中的应用[C]//第11届全国电气自动化电控系统学术年会论文集,西安,2002:234-236.
[3]孙莹.PLC飞剪控制系统[J].电气时代,2001(6):22-23.
[4]蔡志军,陈劲松,张磊.高速线材飞剪的自动化控制[J].安徽机电学院学报,2001(4):45-47.
[5]高越农,史清源,陈胜波,等.起停式切头飞剪采用PLC控制的设计与调试[J].电气传动自动化,1999,21(3):53-54.
[6]孟亚东,李长春,马福聚.用PLC与触摸屏实现非开关量的控制[J].机电工程,2007,24(7):91-93.
[7]申立琴,马彩文,田新锋.西门子PLC控制大量步进电机的应用研究[J].机电工程,2008,25(3):37-39.



友情链接

浙江机械信息网