《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于AMESim的PQ泵特性研究*

作者:郑昌马1,吴坚锋1,马冲2,孔晓武2 日期:2010-03-26/span> 浏览:3273 查看PDF文档

基于AMESim的PQ泵特性研究*

郑昌马1,吴坚锋1,马冲2,孔晓武2
(1.仙居永灵液压机械有限公司,浙江 仙居 317300;2.浙江大学 流体传动与控制国家重点实验室,浙江 杭州 310027)

摘要:针对PQ泵动态特性中存在流量阶跃慢、超调量大等问题,在分析了YL56型PQ泵工作原理的基础上,建立了基于AMESim仿真软件的PQ泵仿真模型,通过试验验证了仿真模型的正确性并研究了PQ泵的静态与动态特性,以及调节阀弹簧刚度、变量弹簧刚度对流量阶跃特性的影响。研究结果表明:增加变量弹簧刚度能减小流量上升时间,加快响应速度,但会增加泵的内泄漏量;增加调节阀弹簧能够有效降低流量阶跃的超调量,减少振荡次数,但会增加泵输出流量的稳态误差。
关键词:PQ泵;仿真;电液比例;动态特性
中图分类号:TH137.5文献标识码:A文章编号:1001-4551(2010)01-0059-03

Research on the characteristic of PQ pump based on AMESim
ZHENG Changma1, WU Jianfeng1, MA Chong2, KONG Xiaowu2
(1. Yongling Hydraulic Mechanical Co.Ltd., Xianju 317300, China;
2. State Key Lab. of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China)
Abstract: Aiming at the speed and overshoot of flow step response,working principle of PQ pump was analyzed, and simulation model of PQ pump was developed using AMESim. The steady and dynamic characteristic in simulation was compared with that in experiment, and the simulation model was proved right. Through the study of the spring rigidity, the results indicate that increasing the displacementvarying spring rigidity can cut risetime of flow, but cause more internal leakage; increasing the spring rigidity of control valve can decrease overshoot of flow step response and the number of vibration, but cause more steadystate error.
Key words: PQ pump; simulation; electrohydraulic proportional; dynamic characteristic
参考文献(References):
[1]吴根茂.新编实用电液比例技术[M].杭州:浙江大学出版社,2006.
[2]徐绳武.柱塞式液压泵[M].北京:机械工业出版社,1985.
[3]MANRING N D, JOHNSON R E. Modeling and designing a variabledisplacement openloop pump[J]. Journal of dynamic systems, measurement, and control,1996,118(2):267-271.
[4]KALLAFETIS P, COSTOPOULOS T. Modelling and simulation of an axial piston variable displacement pump with pressure control[J]. Mechanism and Machine Theory,1995,30(4):599-612.
[5]乔丰立,唐兵,卢,等.比例控制径向柱塞泵性能预测[J].机械工程学报,2005,41(10):66-70.
[6]肖岱宗.AMESim仿真技术及其在液压元件设计和性能分析中的应用[J].船舶科学与技术,2007,29(A01):142-145.
[7]田国华,欧长劲.等流量柱塞泵凸轮轮廓的最小二乘法数控编程[J].机电工程,2009,26(7):40-42.
[8]王占森.AMESim系统建模和仿真从入门到精通[M].北京:北京航空航天大学出版社,2005.
[9]钱道光,陈奎生,陈阳国,等.基于AMESim的新型元件与液压系统仿真[J].机械,2008,35(11):71-73.
[10]邬国秀.基于AMESim的阀控液压缸液压伺服系统仿真[J].机械,2008,35(1):28-30.



友情链接

浙江机械信息网