《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

一种管道自动对接装置的结构设计

作者:孙玉成 日期:2009-12-30/span> 浏览:4017 查看PDF文档

一种管道自动对接装置的结构设计

孙玉成
(杭州太阳铸造工程技术有限公司,浙江 杭州 310009)

摘要:针对人工操作气力输送管道存在的对接或分开劳动强度大、效率低下和不安全等缺点,需要探索一种快捷自动的对接方式。通过对不同对接形式的研究和分析,获得了不同管接头的结构特征和动作轨迹,确定了对接的必要条件,完成了针对管道实现自动对接的功能设计,采用了在对接的同时保证紧固可靠的结构形式。实际应用结果表明,该对接装置能快速有效地实施管道对接,达到了研究和设计的目的。
关键词:气力输送;管道对接;可伸缩
中图分类号:TH122文献标识码:B文章编号:1001-4551(2009)12-0112-03

Structual design of an automatic pipeline interconnection device
SUN Yu-cheng
(Hangzhou Sun Foundry Engineering Technology Co., Ltd., Hangzhou 310009, China)
Abstract: Aiming that the traditional way of pneumatic conveying through pipelines not only requests great labour intensity but puts corporations into deep insecure enviroment and low efficiencies, it is time to call for an alternative with faster automatic interconnection functions.Structures and action tracks of different joints were obtained and prerequisites were confirmed based on research and analysis on various interconnections. Automation was introduced in designing of the pipeline interconnection and a more reliable and secure structure was used during applicaiton. The application result shows that the device has succeeded in completion of effective interconnection conveying and satisfied the objective of this research and design.
Key words: pneumatic conveying; pipelien interconnection; scalable
参考文献(References):
[1]黄标.气力输送[M].上海:上海科学技术出版社, 1984.
[2]张云伟,颜国正,丁国清,等.煤气管道机器人管径适应调整机构分析[J].上海交通大学学报,2005,39(6):950-952.
[3]北京钢铁学院热工水力学教研组.气力输送装置[M].北京:人民交通出版社, 1974.
[4]任晓东,冯祖仁,苏承平.利用姿态约束的并联机器人运动学标定方法[J].西安交通大学学报,2008,42(12):1445-1449.
[5]徐灏,蔡春源,严隽琪,等.机械设计手册[M]. 北京:机械工业出版社,2000.
[6]万会雄,明仁雄.液压与气压传动[M].北京:国防工业出版社,2008.
[7]周卫民,吴作伦,吴瑞明.塑料压力管道多角度热熔焊机液压系统[J].机电工程,2008,25(11):57-60.
[8]王飞,陈坡,金志江,等.在用工业压力管道未焊透缺陷容限尺寸的安全性评价[J].轻工机械,2008,26(6):118-121.



友情链接

浙江机械信息网