基于SCADA/EMS的变电设备故障诊断专家系统*

作者：翁国庆1，华良2 日期：2009-11-16/span> 浏览：2914 查看PDF文档

基于SCADA/EMS的变电设备故障诊断专家系统*

翁国庆1，华良2
（1.浙江工业大学 信息工程学院，浙江 杭州 310014；2.浙江商业职业技术学院，浙江 杭州 310053）

摘要：针对变电站高压电气设备状态检测和故障诊断的问题，提出了基于数据采集与监视控制系统（SCADA/EMS）的变电设备故障诊断专家系统的整体设计方案。将变电设备故障诊断专家系统集成为SCADA/EMS系统中的一部分，实现了变电站作为整体进行分布式在线监测和故障诊断的功能。研究结果表明，该方案可充分利用SCADA/EMS原有的网络平台和设备状态监控信息，减少了变电站变电设备在线监测系统建设的网络和测点投资，适应于变电站综合自动化和无人值守的发展要求。
关键词：变电设备；故障诊断；专家系统；数据采集与监视控制系统
中图分类号：TM769文献标识码：A文章编号：1001-4551(2009)10-0074-04

Expert system of fault diagnosis in power equipment based on SCADA/EMS
WENG Guoqing1, HUA Liang2
（1. College of Information Engineering, Zhejiang University of Technology, Hangzhou 310014, China;
2. Zhejiang Vocational College of Commerce, Hangzhou 310053, China）
Abstract: Aiming at state detection and fault diagnosis of high voltage electrical equipments in power substation, a scheme of an expert system based on supervisory control and data acquisition/energy management system(SCADA/EMS) for fault diagnosis of electrical equipment was proposed. The power substation was considered as a whole and the expert system was integrated into the SCADA/EMS as one of its subfunction modules. The research results indicate that the existent communication network and state information of electrical equipments in SCADA/EMS can be used adequately, which will reduce the expense on building communication network and measure nodes for online monitoring system, and meet the needs of integrated substation automation and unattended substation mode.
Key words: power equipment; fault diagnosis; expert system; supervisory control and data acquisition/energy management system(SCADA/EMS)
参考文献(References):
［1］安文斗,孙才新，周泉，等.基于SCADA/AM/FM/GIS的电气设备绝缘在线监测系统的设计［J］.中国电力,2003,36(11):29-32.
［2］李博.变电站主电气设备状态监测与故障诊断技术应用［J］.中国电力,2002,35(11):37-41.
［3］吴宏琅，郑小晴.浅谈高压电气设备在线监测技术［J］.福建电力与电工,2005,25(1):19-22.
［4］苏鹏声，王欢.电力系统设备状态监测与故障诊断技术分析［J］.电力系统自动化,2003,27(1):61-65.
［5］王士政.电网调度自动化与配网自动化技术［M］.北京:中国水利水电出版社,2003.
［6］杨超，陈仕修.变电站专家系统的研究［J］.广东输电与变电技术,2005(3):1-3.
［7］李建坡，赵继印，郑蕊蕊，等.基于灰关联理论的变压器故障诊断专家系统［J］.东北电力技术,2008，29(7):8-10.
［8］王建林，屠立.计算机控制系统软硬件的应用与关键技术［J］.轻工机械，2008，26（6）：1-4.
［9］魏鲁原，崔霞.专家系统在变压器故障诊断中的应用［J］.机床与液压,2007,35(7):251-253.