基于计算机视觉的圆锯片精密集成测量*

作者：刘庆民,赵玲,杨耀华 日期：2009-11-16/span> 浏览：3866 查看PDF文档

基于计算机视觉的圆锯片精密集成测量*

刘庆民,赵玲,杨耀华
（杭州电子科技大学 机械工程学院,浙江 杭州 310018）

摘要：为了提高圆锯片图像边缘的定位精度，提出了一种在边缘点灰度梯度方向上对梯度幅值进行插值的亚像素细分算法。为了满足高速测量的需要，将图像处理、尺寸标定、参数计算等整个测量过程集成起来，构建了圆锯片的计算机视觉测量系统。实验结果表明，利用改进的亚像素方法与直线Hough变换实现测量时，达到了精密、高速的测量要求。
关键词：圆锯片；电荷耦合器件；拟合；测量；亚像素；误差
中图分类号：TG83文献标识码：A文章编号：1001-4551(2009)10-0019-05

Precision integrated measurement on circular saw blade based on computer vision
LIU Qingmin, ZHAO Ling, YANG Yaohua
(College of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China)
Abstract: Aiming at enhancing the orientation precision of image edge, a new subpixel arithmetic applying the polynomial interpolation to subpixel edge detecting at the gradient direction of edge on gradient images was put forward. To meeting quickspeed measurement, the whole course containing image process, parameter calculation, and calibration etc. were integrated. The measurement system on circular saw blade was established. Experiment results show that, while taken the subpixel method and the Hough transformation, the whole measurement reaches the speed and the precision requirements of rapid precision measurement.
Key words: circular saw blade; charge coupled device(CCD); fitting; measurement; subpixel; error
参考文献(References):
［1］TAN Jiubin, AO Lei, CUI Jiwen, et al. Further improvement of edge location accuracy of chargecoupleddevice laser autocollimators using orthogonal FourierMellin moments［J］. Optical Engineering,2007,46(5):68-70.
［2］CHEN G, CHE R S. Stereo vision sensor field calibration method based on volume template［J］. Optics and Precision Engineering,2004,12(6):626-631.
［3］HARTLEY R, ZISSERMAN A. Multiple View Geometry in Computer Vision［M］. New York: Cambridge University Press,2000:568-582.
［4］YU Z J. Accurate camera intrinsic parameters calibration using virtual stereo board［J］. The International Society for Optical Engineering,2005,56(33):371-382.
［5］WANG Xiaojia, GAO Jun, WANG Lei. A Survey of Subpixel Object Localization for Image Measurement［C］//International Conference on Information Acquisition. Hefei: ［s.n.］,2004:398-401.
［6］LAHAJNAR F. Machine vision system for inspecting electric plates［J］. Computer in Industry,2002,4(7):113-122.
［7］马强,唐文彦,陈金存,等.自由环状零件尺寸图像测量系统研究［J］.航天制造技术,2004(1):27-31.
［8］高春甫,邬敏.粗糙表面精度测量系统的研究［J］.光学精密工程,2005,13(6):697-702.
［9］党宏社,胡尊凤.基于灰度矩亚像素定位算子的视觉测量方法研究［J］.陕西科技大学学报,2008,26(3):79-82.
［10］杨丽凤,韩冀皖,李元宗.面阵高精度测量技术的应用［J］.太原理工大学学报,2001,32(5):455-458.
［11］李庆利,张少军,李忠富,等.一种基于多项式插值改进的亚像素细分算法［J］.北京科技大学学报,2003,25(3):280-282.
［12］于起峰,陆宏伟,刘肖琳.基于图像的精密测量与运动分析［M］.北京:科学出版社,2002.
［13］李云飞,司国良,郭永飞.科学级CCD相机的噪声分析及处理技术［J］.光学精密工程,2005,13(S1):158-163.
［14］陈迎娟,张之江,张智强.CCD像素响应不均匀性的校正方法［J］.光学精密工程,2004,12(2):216-220.