《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

FPGA加速处理的实时相位差测量方法*

作者:阳彩,徐伟,王国雄 日期:2009-06-24/span> 浏览:2991 查看PDF文档

FPGA加速处理的实时相位差测量方法*

阳彩,徐伟,王国雄
(浙江大学 电气工程学院,浙江 杭州 310027)

摘要:为实现高速相位差测量,采用频域分析方法,通过可编程门阵列(FPGA)进行了快速傅里叶变换(FFT)运算,并且运用坐标旋转数字计算机(CORDIC)算法提高了其运算性能。最终,提出了一种新的实时相位差测量方法。仿真结果表明,在保证高速的同时,测量结果有较好的精度。
关键词:相位差测量;快速傅里叶变换;可编程门阵列;坐标旋转数字计算机
中图分类号:TP216文献标识码:A文章编号:1001-4551(2009)06-0074-03

Realtime phase difference measurement method with FPGA speeding up
YANG Cai, XV Wei, WANG Guoxiong
(College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China)
Abstract: In order to measure the phase difference at high speed, using the analyzing solution in frequency domain, with the field programmable gate array(FPGA), the FFT transformation was finished. The coordinate rotation digital computer(CORDIC) algorithm was used to improve the performance of the FPGA. A new realtime phase difference measurement method was proposed. The simulation results show that accurate measurement result can be obtained at high speed.
Key words: phase difference measurement; fast Fourier transform(FFT); field programmable gate array(FPGA); coordinate rotation digital computer(CORDIC)
参考文献(References):
[1]杨新华,陈玉松,金兴文.基于FFT谱分析算法的高精度相位差测量方法[J].自动化与仪器仪表,2006(6):75-77.
[2]张盛耀,李思敏.CORDIC算法在基于FPGA的数字信号处理中的应用[J].科技咨询导报,2007(8):16-17.
[3]ANDRAKA R. A Survey of CORDIC Algorithms for FPGA based Computers[C]∥Proceedings of ACM International Symposium on FPGA. Mentery, USA: IEEE,1998:191-200.
[4]HU Y H. CORDIC based VLSI architectures for digital signal processing[J]. IEEE Signal Processing Magazine,1992,9(3):16-35.
[5]李培芳,孙晖,李江.信号与系统分析基础[M].北京:清华大学出版社,2006.
[6]李成诗,初建朋,李新兵,等.基于CORDIC的一种高速实时定点FFT的FPGA实现[J].微电子学与计算机,2004,21(4):88-91.



友情链接

浙江机械信息网