热泵压缩机性能测试系统的开发

作者：谢慧峰，姜周曙，黄国辉，丁强 日期：2009-06-24/span> 浏览：3868 查看PDF文档

热泵压缩机性能测试系统的开发

谢慧峰，姜周曙，黄国辉，丁强
（杭州电子科技大学 自动化研究所，浙江 杭州 310018）

摘要：压缩机热工性能的优劣直接关系到热泵系统的制冷与制热效果，对其进行性能测试与评价具有非常重要的意义。为此开发了一套压缩机测控系统，根据测试方法的要求，提出了系统的结构框架，并介绍了测试系统，在对系统的软、硬件进行调试的基础上，对压缩机进行了热工性能测试，并给出了对试验结果的分析。实际运行结果表明，该系统性能稳定、运行可靠、各项测试精度基本达到要求，具有一定的实用价值。
关键词：压缩机;性能测试;热泵系统;第二制冷剂量热器法
中图分类号：TP311文献标识码：A文章编号：1001-4551(2009)06-0071-04

Development of a performance testing system for the heatpump compressor
XIE Huifeng, JIANG Zhoushu, HUANG Guohui, DING Qiang
(Institute of Automation, Hangzhou Dianzi University, Hangzhou 310018, China)
Abstract: The heating and cooling efficiency of heatpump can be affected directly by the performance of compressor. Aiming at the importance to obtain operation parameters for the test and evaluation of the compressor, the performance testing system for the heatpump compressor was developed. According to the requirements of the method of the second refrigerant, the framework of the system was proposed. Then the whole system was introduced in detail. After the software and hardware were debugged, several sets of test were carried out to checkout the whole system. The test results show that, the system is reliable and can be easily operated, the accurate of system can meet the requirement of testing standards.
Key words: compressor; performance test; heatpump system; the method of the second refrigerant
参考文献(References):
［1］陈光明,房杉.以R32+R134a/DMF为工质的自行复叠吸收制冷循环性能分析［J］.制冷学报,2006,27(4):32-35.
［2］徐邦裕,陆亚俊,马最良.热泵［M］.北京：中国建筑工业出版社,1988.
［3］张旭.热泵技术［M］.北京:化学工业出版社,2007.
［4］王如竹,丁国良.制冷空调新技术进展［M］.上海:上海交通大学出版社,2003.
［5］ASTROM K J, WITTENMARK B. Computer Controlled Systemstheory and Design［M］. 3rd ed. Tsinghua University Press & Prentice Hall，2002.
［6］FRANKLINETAL G F. Digital Control of Dynamic System［M］. 3rd ed. Tsinghua University Press & Prentice Hall,2001.
［7］COOPER W S. Operative experience with water loop heat pump［J］. ASHRAE Transaction,1999(2):1569-1576.
［8］李压勤,蒋小洛.压缩机计算机监控软件的实现［J］.机电工程,2006,23(10):15-17.
［9］朱玉锋,董金华.往复活塞式压缩机冷却系统的设计及进展［J］.轻工机械,2006(1):48-50.