《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

PLC基于开关量实现模拟量输出的方法

作者:王智明 日期:2009-06-17/span> 浏览:3377 查看PDF文档

PLC基于开关量实现模拟量输出的方法

王智明
(中国重汽集团 杭州发动机有限公司,浙江 杭州 310015)

摘要:为了低成本地实现PLC模拟量输出控制,提出了利用PLC开关量输出实现模拟量输出的方法。采用脉宽调制技术,通过控制脉冲占空比的方法控制PLC晶体管开关量输出信号;使用平滑电路以提高所输出的模拟量信号的线性度,使其具有输出一定范围的模拟量的功能,并拓展了PLC晶体管开关量输出的功能。研究结果表明,该方法的使用大大降低了设备成本的投入,可应用于对模拟量信号分辨率及精度要求不高的场合,具有一定的实用价值。
关键词:可编程逻辑控制器;开关量输出;模拟量输出;PWM脉宽调制;占空比;RC时间常数
中图分类号:TP273文献标识码:B文章编号:1001-4551(2009)05-0105-03

Method of achieving analog value output based on PLC digital output
WANG Zhiming
(Hangzhou Engine Co., Ltd., China National Heavy Duty Truck Group, Hangzhou 310015, China)
Abstract: In order to realize the controlling of analog value output by programmable logic controller(PLC) with low cost, a method of PLC digital value was put forward to realize the analog value output. Using the pulse width modulation (PWM) technology, PLC transistor digital output signal was controlled by controlling the duty ratio of the pulse. By applying smooth circuit, the linearity of the output analog signal was improred. The functionality of the PLC transistor digital output was widened. The research shows that the method greatly reduces the equipment cost, and can be practically used in cases where analogue value resolution and precision are not highly demanded.
Key words: programmable logic controller(PLC); digital output; analogue output; pulse width modulation(PWM); duty ratio; RC time constant
参考文献(References):
[1]李永东.脉宽调制(PWM)技术—回顾、现状及展望[J].电气传动,1996,26(3):2-12.
[2]盛乐山.测量波形占空比的一种新方法[J].中国民航学院学报,1992,12(4):41-44.
[3]Mitsubishi Electric Corporation.Fx1s,Fx1n,Fx2n,Fx2nc编程手册[M].三菱电机,2001.
[4]刘曼,李岚.SIMATIC S7200 CPU22X系列PLC脉宽可调高速脉冲输出(PWM)的使用[J].江西科学,2007,4(2):206-216.
[5]Siemens.S7200可编程控制器系统手册[M].Siemens,2004.
[6]张寿兵,沈晓红.PLC在步进电机控制中的应用[J].机电工程技术,2008,37(1):104-106.
[7]Siemens.SIMATIC Programming with STEP7 V5.3 Manual[M].Siemens,2004.



友情链接

浙江机械信息网