《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于直线插补的字体边缘识别技术*

作者:赵燕伟1,朱双胜1,2,卢东1,田先斌1,杨帆1 日期:2009-06-17/span> 浏览:3391 查看PDF文档

基于直线插补的字体边缘识别技术*

赵燕伟1,朱双胜1,2,卢东1,田先斌1,杨帆1
(1.浙江工业大学 机械制造及自动化教育部重点实验室,浙江 杭州 310014; 2.许昌技术经济学校,河南 长葛 461500)

摘要:为了满足市场上对各种汉字加工的需要,在Windows系统下,通过对汉字边缘识别技术的研究分析,提出了基于BMP图形像素点的八方向边缘检测算法,成功地识别和提取了不同参数的字体外形轮廓信息,并采用逐点比较直线插补算法,提取了关键数据点的信息,最后开发了XY运动仿真平台控制软件,实现了字体运动轨迹的仿真及实际雕刻加工。研究结果表明,基于该技术的字体加工效果理想。
关键词:直线插补;边缘识别;字体加工
中图分类号:TP391.1文献标识码:A文章编号:1001-4551(2009)05-0052-04

Font recognition technology based on the edge of straightline interpolation
ZHAO Yanwei1, ZHU Shuangsheng1,2, LU Dong1, TIAN Xianbin1, YANG Fan1
(1. Mechanical Manufacturing and Automation Key Laboratory of the Ministry of Education, Zhejiang University of Technology,
Hangzhou 310014, China; 2. Xuchang Technical and Economic Schools, Changge 461500, China)
Abstract: In order to meet the market for a variety of Chinese character processing needs, drawing the profile of font,in the Windows system, the edge recognition technology was researched. The pixels marginal detection from eight directions was introduced, BMP graphics was presented based on the eightmegapixel point the direction of the edge detection algorithm. The information of key data points was extracted.The XY motion simulation platform based on the straightline interpolation through point by point comparison was developed, the simulation of font path and engraving process was achieved. The experemantal results show that the effect based on the technology is ideal.
Key words: straightline interpolation; marginal detection; font processing
参考文献(References):
[1]谢明红.基于Windows矢量字库的切割系统的研究与开发[J].计算机工程与应用,2007,43(18):103-105.
[2]张建生,赵燕伟.数控系统应用及开发[M].北京:科学出版社,2006.
[3]唐锐.平面任意二次曲线插补算法研究[J].机械工程师,2007(10):25-26.
[4]深圳固高科技.GT系列运动控制器编程手册[M].深圳:固高科技,2003.
[5]谭浩强.C++程序设计[M].北京:清华大学出版社,2004.
[6]赵有定,李英.基于VC++数控插补可视化实现[J].机械工程师,2008(1):29-31.



友情链接

浙江机械信息网