《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于XML和神经网络的协同CAPP*

作者:沈国强,姜涛,邵健,褚长勇 日期:2009-04-21/span> 浏览:2952 查看PDF文档

基于XML和神经网络的协同CAPP*

沈国强,姜涛,邵健,褚长勇
 (杭州电子科技大学 机械工程学院,浙江 杭州 310018)

摘要:针对传统计算机辅助工艺规划(CAPP)系统通用性和实用性很差的问题,根据机械产品工艺设计特点,采用Web基、XML和神经网络技术,介绍了协同式CAPP系统的设计方法,详细探讨了XML工艺信息建模、神经网络以及工艺设计过程协同等关键技术,并实现了原型系统。研究结果表明,协同式CAPP系统具有良好的实用性,并提高了产品的工艺设计效率。
关键词:计算机辅助工艺规划;工艺设计;Web;协同;神经网络
中图分类号:TP391.1文献标识码:A文章编号:1001-4551(2009)04-0053-04

CAPP system based on XML and neural network
SHEN Guo-qiang, JIANG Tao, SHAO Jian, CHU Chang-yong
 (College of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China)
Abstract: Aiming at the poor universality and practicability of computer aided process planning(CAPP) system, according to the characteristics of process planning, using Web, XML and neural network technologies, the design methods of the collaborative CAPP system were introduced. Some key technologies such as the modeling of process information based on XML, neural network decision-making and the collaborative technology of process planning were discussed in detail. Finally, a prototype system was realized. The results of research show that the system has a good practicality, and it improves the efficiency of process planning greatly.
Key words: computer aided process planning(CAPP); process design; Web; cooperative; neural networks



友情链接

浙江机械信息网