基于虚拟仪器的三轴影像测量系统

作者：潘勇，单越康，张士博 日期：2009-02-23/span> 浏览：3365 查看PDF文档

基于虚拟仪器的三轴影像测量系统

潘勇，单越康，张士博
（中国计量学院 质量与安全工程学院，浙江 杭州 310018）

摘要：使用虚拟仪器技术开发影像测量应用系统比传统的软件开发方法更占优势。为此，基于虚拟仪器技术，建立了具有通用性的影像测量系统，并给出了软、硬件开发的具体实现。该系统主要硬件为USB摄像机、PMAC运动控制卡、伺服电机、三维机械运动平台，软件开发工具为LabVIEW和IMAQ Vision工具包。研究结果表明，此系统可以实现三维空间的精密定位，通过影像法对被测物进行精密测量，影像测量功能还可以根据需要来扩展。
关键词：影像测量系统; LabVIEW; IMAQ; PMAC
中图分类号：TP319文献标识码：A文章编号：1001-4551(2009)02-0102-03

3-axis vision measuring system based on virtual instrument technique
PAN Yong, SHAN Yue-kang, ZHANG Shi-bo
(College of Quality and Safety Engineering, China Jiliang University, Hangzhou 310018, China)
Abstract: Developing vision measuring system with virtual instrument technique has more advantages than with traditional methods. A vision measuring system based on virtual instrument was introduced. The design methods of hardware and software were also presented. The system hardware was consist of USB-camera, motion control card (PMAC), servomotor and three dimensional motion measurement platform. The system software was designed by LabVIEW and IMAQ Vision development module. The results show that the system is used for precision positioning and computer vision measuring. Its measurement function can be added according to requirements.
Key words: vision measuring system; LabVIEW; IMAQ; PMAC
参考文献(References):
［1］O今天，桑宏强,张建业.基于虚拟仪器技术的机电一体化教学实验平台［J］.机电工程,2008,25(8):111-113.
［2］赖永泉,王毅,曹银强.基于DLL的虚拟仪器系统开发技术［J］.自动化技术与应用，2005,24(4):62-65.
［3］ARCHAN A, SHROTRIY A. Writing Win32 Dynamic Link Libraries (DLLs) and Calling Them from LabVIEW［M］. National Instruments Corporation, 1996:1-11.
［4］NATIONA L, INSTRUMENT S. LabVIEW Advanced Performance & Communication Course Manual［M］. National Instruments Corporation, 2001:17-49.
［5］杨乐平,李海涛.LabVIEW高级程序设计［M］.北京:清华大学出版社,2003.
［6］JJF(浙)1001－2007影像测量仪校准规范［S］．杭州：浙江省质量技术监督局,2007.