《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

硅镜超声加工机进给压力的检测与控制系统*

作者:张云电,韩俊慧,陈炎,余芳 日期:2009-02-23/span> 浏览:3235 查看PDF文档

硅镜超声加工机进给压力的检测与控制系统*

张云电,韩俊慧,陈炎,余芳
(杭州电子科技大学 机械工程学院,浙江 杭州 310018)

摘要:超声加工是硅镜加工的有效加工方法,但是硅镜在加工中易出现裂纹和破碎。研究表明,工具对硅镜表面施加的压力不稳定是其中的一个重要原因。为了控制工具对硅镜表面施加压力的稳定性,采用压力传感器对硅镜表面施加的压力进行实时检测,并反馈给控制元件,一旦所检测到的压力超过所设定的额定压力值,控制元件就向执行元件发出执行指令,从而达到控制工具的目的。试验表明,该压力检测与控制系统可以有效地保证对硅镜表面所施加压力的稳定性,从而减少了硅镜在加工过程中出现破裂的情况。
关键词:硅镜;压力检测与控制系统;超声加工
中图分类号:TP271.4文献标识码:A文章编号:1001-4551(2009)01-0074-03

System of detecting and controlling feed force for ultrasonic machine of machining silicon mirror
ZHANG Yun-dian, HAN Jun-hui, CHEN Yan, YU Fang
(College of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China)
Abstract: Ultrasonic machining is an effective method in the process of machining silicon mirror. However, cracks would appear in the process. Research shows that the instability of pressure which imposed on the silicon mirror surface is one of important reasons. The pressure in the surface of the Sic mirror by sensor was detected, the signal to control component was delivered. Once, the detecting pressure exceeded the setting pressure, the control component delivered an executive directive to the implementation component. Thus, the implement could be controlled. And, the experiment shows that this system with detection and control of force is effective and will reduce cracks in machining Sic mirror.
Key words: Sic mirror; system with detection and control of force; ultrasonic machining
参考文献(References):
[1]张云电.超声加工及其应用[M].北京:国防工业出版社,1995.
[2]KIM D, LEE  E S. A study of the ultrasonic vibration cutting of carbon fiber reinforced plastics[J].Journal of Materials Processing Technology, 1994,3(1): 259-277.
[3]LAWN B R, SWAIN M V. Microfracture beneath point indentations in brittle solids[J].Journal of Materials Science, 2005(10): 113-122.
[4]丁镇生.传感器及其传感器技术应用[M].北京:电子工业出版社,1998.
[5]蔡美琴.MCS-51系列单片机系统及其应用[M].2版.北京:高等教育出版社,2004.
[6]杨兆军,杨永海,王伟国.微孔钻削的在线实时监测[J].吉林大学学报:自然科学版,2003,33(2):35-37.
[7]中国机械工业教育协会.单片机原理与应用[M].北京:高等教育出版社,2001.
[8]李广弟.单片机基础[M].2版.北京:北京航天航空大学出版社,2001.
[9]张云电,余芳.硅镜超声加工声学系统设计[J].机电工程,2008,25(6):24-26



友情链接

浙江机械信息网