微晶玻璃细深孔超声加工工具有限元分析*

作者：张云电，陈强，陈炎 日期：2008-12-26/span> 浏览：3326 查看PDF文档

微晶玻璃细深孔超声加工工具有限元分析*

张云电，陈强，陈炎
（杭州电子科技大学 机械工程学院，浙江 杭州 310018）

摘要：采用普通钻削加工细深孔的质量很差，在以微晶玻璃为代表的硬脆材料上进行细深孔加工更加困难。为实现在微晶玻璃上的细深孔加工，采用了超声加工方法，完成了超声加工声学系统的设计，并用有限元分析方法对工具在不同压力下的变形和应力进行了分析。实验结果表明，该超声加工工具可以满足微晶玻璃细深孔的加工要求。
关键词：细深孔加工；超声加工；硬脆材料；有限元分析
中图分类号：TB559;O242.21文献标识码：A文章编号：1001-4551(2008)12-0092-04

Finite element analysis of ultrasonic machine tools processing of vitro ceram long and thin hole
ZHANG Yun-dian, CHEN Qiang, CHEN Yan
（College of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China)
Abstract: The quality of long and thin hole is poor by ordinary drilling technology. Taking the vitro ceram as representative in the hard and brittle materials, it is more difficult to process deep and long hole. Aiming at realizing processing long and thin hole on the vitro ceram, the ultrasonic machining technique was used. The design of ultrasonic machining acoustics system was completed. The analysis of the tool distorted and stress under the different pressure force was taken by finite element analysis. The test results indicate that the tool can satisfy the request to process long and thin hole on the nucleated glass.
Key words: small and deep holes machining; ultrasonic machining; hard and brittle material; finite element analysis
参考文献(References):
［1］曹凤国,张勤俭.超声加工技术的研究现状及其发展趋势［J］.电加工与磨具,2005(S1):25-26.
［2］张云电.超声波加工及其应用［M］.北京：国防工业出版社，1997.
［3］张云电,胡皇印，林金钳，基于Hopfield网络的硅镜异形盲孔超声加工路径规划［J］.机电工程，2008，25（2）：15-17.
［4］张云电.数控恒力进给超声波珩磨机：中国，ZL00237037［P］.2000-06-02.
［5］邓福铭,陈启武.PCD超硬复合刀具材料及其应用［M］.北京：化学工业出版社,2003.
［6］KLINK U. Method and tool for maching the surface of workpiece surface: US,4980996[P].1991-01-01.
［7］GRIMM H. Mehtods of finishing a surface of a workpiece: US,5441439[P].1995-01-01.
［8］YANG Zhao-jun, LI Wei, CHEN Yan-hong. Study for increasing micro-drill reliability by vibrating drilling［J］. Reliability Engineering and System Safety,1998,61(3)：29-233.