钢管检测与标识监控系统的设计与实现

作者：张春祥 日期：2008-11-03/span> 浏览：3898 查看PDF文档

钢管检测与标识监控系统的设计与实现

张春祥
(安徽天大石油管材股份有限公司，安徽 天长 239311）

摘要：介绍了钢管检测与标识监控系统的软硬件设计思想及实现方法。该控制系统采用了集散控制，下位机采用西门子S7 PLC，实现了对钢管测长、称重、打标、涂色和喷标的自动控制；上位机采用工控机，实现了生产过程的实时监控。研究结果表明，操作人员通过计算机就可以观察到现场各设备运转状况和钢管的参数、好坏管的处理，并可及时操作控制，实现了钢管检测与标识过程的自动化。
关键词：可编程控制器;集散控制系统;计算机监控系统
中图分类号：TP273文献标识码：A文章编号：1001-4551(2008)10-0024-03

Design and implementation of monitoring system in steel pipe measuring and marking
ZHANG Chun-xiang
(Anhui Tianda Oil Pipe Co. Ltd., Tianchang 239311, China)
Abstract: The hardware and software designing idea and accomplishing method of monitoring system in steel pipe measuring and marking production line were introduced. The production line adopted a distributed control system, the lower computer automatically controlled length measuring, weighing, pin-stamping, color-banding and stenciling through Siemens S7 PLC. The upper computer monitors real-time working status through industrial PC was realized. The experimental results show that, the operator can read operations of each working station, pipe parameters and processing of eligible and defective pipes from computer and operate the system properly, thus, the system realizes automation of steel pipe measuring and marking procedure.
Key words: programmable logic controller(PLC); distributed control system(DCS); supervisory computer control system
参考文献(References):
［1］西门子公司.SIMATIC S7梯形图编程手册[M].西门子公司,1998.
［2］黄家英.自动控制原理[M].成都:东南大学出版社,1996.
［3］陈冠玲.过程控制系统的新特点[J].世界仪表与自动化,2002,6(10):57-58.
［4］褚建新，顾伟.集散型控制系统控制律的系统化建模方法[J].自动化仪表,2002,23(10):52-55.
［5］胡德延.用PLC实现的一种集散型控制系统[J].煤矿自动化,2000(4):22-23.
［6］江永福,廖晓梅.PLC上位机监控软件的开发[J].橡塑技术与装备,2003,29(2):45-47.
［7］陈建松,任祖平.利用Delphi制作PLC控制系统上位机监控软件[EB/OL].[2008-02-16].http://www.prcode.cn/html/shangweijiruanjianjishu/20080216/51.html.