《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于网络化制造CNC系统的应用研究

作者:陈国飞,陈国金,留丽苑 日期:2006-12-07/span> 浏览:3672 查看PDF文档

基于网络化制造CNC系统的应用研究
陈国飞,陈国金,留丽苑
(杭州电子科技大学  浙江  杭州 310018)
摘要:   针对当前制造企业信息化,网络化的要求,分析了我国的制造业目前的现状和存在的问题,对新一代网络化的数控系统提出了相应要求,并结合实例进行了具体分析和软件设计。
关键词: 网络化制造;以太网DNC;网络接口;远程监控
Application and Research of  the DNC System Based on the Networked Manufacture
CHEN Guo-fei, CHEN Guo-jin, LIU Li-yuan,
(Hangzhou dianzi university Hangzhou Zhejiang 310018 )
Abstract: According to the requirement of information and network on the manufacturing industry at present, The article analyses the actual state and existing problem in our country’s manufacture, thus puts forward the relevant desire to networked numerical control system of new generation. It also puts up the idiographic analysis and the software design in detail combined with actual example.

Key words: Networked Manufacture; Ethernet DNC; Network-interface; Remote Monitoring

参考文献:
[1]  闫伟国,王敏杰,何视林.DNC 技术的内涵和发展[J]. 组合机床与自动化加工技术,2001,(8):28-30.
[2] 吴 飞,吴华春,江征风.基于以太网的DNC系统的应用研究[J].机械工程与自动化,2005,(4):4-6.

[3] 谢小轩,张洁,樊留群,等.加工中心远程监控系统的设计与实现[J].制造技术与机床, 2001(6)28-31.



友情链接

浙江机械信息网