《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

圆筒型直线感应电机的遗传优化设计*

作者:康燕琴,上官璇峰,肖家乐 日期:2008-08-18/span> 浏览:3039 查看PDF文档

圆筒型直线感应电机的遗传优化设计*

康燕琴,上官璇峰,肖家乐
(河南理工大学 电气工程与自动化学院,河南 焦作 454003)

摘要:为了更好地将遗传算法应用于圆筒型直线感应电机的优化设计中,分析了遗传算法的优点和局限性,针对其优化设计电机效果不显著的缺点,提出了将遗传算法与有限元法相结合来提高电机性能的方法。首先设计了4种初级槽形不同的电机,用有限元法对其进行了瞬态磁场分析,得出了电机在不同槽形下所产生的电磁推力。将产生电磁推力最大的槽形代替原电机槽形,用遗传算法对变换槽形后的圆筒型直线感应电机进行整体优化设计。结果表明:电机的各项性能有所提高,该优化设计方法效果比较理想。
关键词:圆筒型直线感应电机;有限元法;遗传算法;槽形优化
中图分类号:TM359.4文献标识码:A文章编号:1001-4551(2008)08-0072-04

Optimization design of tubular linear induction motor based on genetic algorithm
KANG Yan-qin, SHANGGUAN Xuan-feng, XIAO Jia-le
(College of Electrical Engineering & Automation, Henan Polytechnic University, Jiaozuo 454003, China)
Abstract: In order to apply genetic algorithm(GA) more efficiently to the optimum design of tubular linear induction motor(TLIM), the merit and the shortcoming of GA were analyzed. Aiming at the deficiency of the optimal design results, a new thought of combining GA with finite element method(FEM) was provided to improve the performance of TLIM. Four motors with different slot shapes were designed and analyzed in transient magnetic field by FEM, finally the TLIM whose slot shape had been substituted by the one that generated maximal electromagnetic thrust was designed optimization by GA. The optimization results show that the performances of TLIM have been improved; the method of this optimization design is practicable and effective.
Key words: tubular linear induction motor(TLIM); finite element method(FEM); genetic algorithm(GA); slot shape optimization
参考文献(Reference):
[1]陈世坤.电机设计:第2版[M].北京:机械工业出版社,2005.
[2]贾宏新,林瑞光,叶云岳.电梯用直线感性电机的优化设计及其控制系统研究[D].杭州:浙江大学电气工程学院,2002.
[3]李鲲鹏,胡虔生.遗传算法电机优化设计简介[J].微特电机,2001,29(4):32-33.
[4]焦留成,汪旭东,袁世鹰.直线感应电动机的优化设计研究[J].中国电机工程学报,1999,19(4):81-83.
[5]雷英杰,张山文.Matlab遗传算法工具箱及应用[M].西安:西安电子科技大学出版社,2006.
[6]ALI M A, ISMAIL A M. Vector optimization design of a shaded-pole induction motor[J]. IEEE Transactions on Energy Conversion,2002,17(3):374-379.
[7]LAURENT J, JABBAR M A. Design optimization of permanent magnet motors using response surface methodology and genetic algorithms[J]. IEEE Transactions on Magnetics,2005,41(10):3928-3930.



友情链接

浙江机械信息网