《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于STEP-NC的数控加工实验平台构建研究

作者:潘淑微1,傅建中2 日期:2008-06-23/span> 浏览:3224 查看PDF文档

基于STEP-NC的数控加工实验平台构建研究

潘淑微1,傅建中2
(1.温州职业技术学院 机械工程系,浙江 温州 325035; 2.浙江大学 机械与能源工程学院,浙江 杭州 310027)

摘要:针对在STEP-NC技术条件下开展数控加工实验的需求,对基于STEP-NC的数控加工实验平台的构建技术进行了研究。确立了保证开放性的系统架构设计原则,实现了功能模块化、高弹性、高可扩展性的实验平台软硬件系统。研究结果表明,采用的架构设计原则、各功能模块设计实现的技术方法是正确和适用的,为发展新型的STEPNC数控系统提供了技术基础与借鉴。
关键词:STEP-NC;数控加工;CNC系统
中图分类号:TP391文献标识码:A文章编号:1001-4551(2008)06-0015-03

Research on construction of NC machining experiment platform based on STEPNC
PAN Shuwei1, FU Jianzhong2
(1.Department of Mechanical Engineering, Wenzhou Vocational & Technical College, Wenzhou 325035, China;
2.College of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027, China)
Abstract: For meeting the demand of NC machining experiment under the conditions of STEP-NC technology, the construction of new NC machining experiment platform based on STEP-NC was researohed. With design principle to guarantee openness, the hardware system and software system were put up. The results of the research denote that, the design principle of platform architecture and the implement techniques of each functional module are applicable and proper, and provide technological bases and references for new STEPCNC system.
Key words: STEP-NC; NC machining; CNC system



友情链接

浙江机械信息网