《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于OptiStruct的电动轿车副车架的结构优化

作者:廖君1,杜里平1,王冯良2,胡望岳2 日期:2008-06-23/span> 浏览:3554 查看PDF文档

基于OptiStruct的电动轿车副车架的结构优化

廖君1,杜里平1,王冯良2,胡望岳2

(1.浙江同济科技职业学院 机电系,浙江 杭州 311231; 2.上海同济同捷科技有限公司,上海 201206)

摘要:针对从燃料电池轿车副车架质量冗余问题,从轻量化研究入手,使用计算机辅助设计软件进行了结构分析,采用铝合金材料,对某燃料电池汽车副车架进行了结构优化,并对新设计的副车架进行了校核。分析结果表明,新副车架在轻量化的同时,各项性能都较原件有很大的改善,该方案为燃料电池汽车轻量化的进一步发展提出了建议。
关键词:轻量化;结构优化;铝合金;副车架
中图分类号:U462.2文献标识码:A文章编号:1001-4551(2008)05-0042-04

Structural optimization of the electric cars frame based on OptiStruct
LIAO Jun1, DU Liping1, WANG Fenliang2, HU Wangyue2
(1.Department of Mechanical & Electrical Engineering, Zhejiang Tongji Vocational College of Science and Technology,
Hangzhou 311231, China; 2.Shanghai Tongji lnnove Engineering and Technology Co.,Ltd., Shanghai 201206, China)
Abstract: Aiming at the problem of viceframes quality redundancy and from the start with lightweight study of fuelcell car, using optimization software with computeraided, a former viceframes structure of fuelcell vehicle was redesigned. By aluminum alloy materials, the structural optimization of the electric cars frame was done, the checking and analyzing of the new frame were processed. The results of analysis show that the lightweight performance of the frames new deputy are much better than the originals at the same time, the suggestions of the fuel cell vehicless lightweight are further put forward.
Key words: lightweight; structural optimization; aluminum alloy; viceframe



友情链接

浙江机械信息网